Here are a few things to keep in mind if you plan on running your skid steer throughout the winter. Cold weather does funny things to construction equipment. If you plan to operate your skid steer throughout the winter, here are a few tips to keep in mind when preparing for cold weather.

Starting in Cold Weather

There are many cold starting options for skid steers, including glow plugs, block heaters, grid heaters, and starting fluid (ether). We recommend and build glow plugs into our skid steers, which are more efficient at heating the cylinders for better starts. Other solutions will work as well, but it’s important to note that ether can be particularly harsh on the engine if used excessively. 

If you do have a skid steer with glow plugs, do not turn the engine until the glow plug indicator on your control panel has gone out. That light indicates that it is still heating, and is only ready to crank when the light goes out. 

The battery is another critical factor. Perform a load test on the battery before the cold weather hits to ensure it operates at full strength under load. A strong battery will have sufficient amps to crank the starter in cold temperatures. Replace a weak battery before getting caught short. Keep a trickle charge on the battery if necessary to ensure it remains fully charged and ready to crank the engine. Perhaps equally as important is the location of the battery. Battery placement closer to the starter allows for a shorter battery cable and less draw on the battery. Some skid steer models also offer a master electrical shut-off switch (standard on CASE machines). This prevents any draw from occurring when sitting idle – important during winter months.

Monitoring Fluids

It’s important to check both the level and the condition of engine coolant, which lowers the freezing point of water-based liquid. Ensure the coolant is at the proper level and that the mixture matches the manufacturer’s specifications. The coolant system should also be pressure-tested. Lighter viscosity engine/hydraulic oil is typically recommended during winter months. It allows the oil to flow more quickly to the engine when it’s cold-started. 

Specially formulated engine and hydraulic oils are also available for operation in the northernmost regions with extremely cold temperatures (Canada, Alaska, the U.S. northern plains). Users should consult manufacturers’ recommendations when selecting coolants and oils for winter operation. Companies that plan on operating throughout the winter should also top off the fuel tank at the end of each day to prevent condensation.

Keep it Greased

Keeping all grease points well greased helps keep out moisture and dirt, and prevents rust, freezing, and seizing. These points should be checked daily.

Stretch Its Legs

If you do plan periodic use throughout the winter, but do not intend on shutting it down completely, make sure to take the machine out and exercise it every couple of weeks to get all of the fluids moving and to ensure all systems are working.

Shutting Down Until Spring?

Your operator’s manual will provide you with a very specific procedure for shutting down your skid steer for the winter. Each model is different – especially as machines evolve from carbureted to fuel injection systems. Follow these procedures to the letter and you’ll be ready for the thaw.